• 兩種電流類型：400V電源電壓時，額定電流3A和6A；
• 直接電網(wǎng)運行，集成電源濾波器；
• 1×115V AC，1×230V AC，3×115V AC，3×230 V AC，3×400V AC供電；
• 電源和再生電路集成在主軸上（根軸）--獨立運行；
• 所有屏蔽接線直接連在放大器上，具有集成的電源濾波器；
• 通過旋轉(zhuǎn)變壓器和高分辨率的Sin/Cos編碼器反饋；
• 電流控制器，速度控制器，位置控制器，電器傳動裝置，RS232，CANopen；
• Profibus或Sercos可選；
• CE，UL，cUL認證。
• Operation directly from 115 to 400 VAC lines (ungrounded operation allowed)
• Output current 3 or 6A rms/phase, continuous
• Power supply and regen circuit integrated in the master (first axis)
• With integral AC line filter, all shields terminate directly to the amplifier
• Mounting on hat rail: suitable for 300mm switchgear cabinets
• Setup from a PC using Danaher Motion setup software
• Interface integrated for stepper controllers, master-slave operation and electronic gearing
• Integrated position controller with memory for 255 motion tasks. Intelligent positioning tasks include:
- speed profiles
- register control
- jolt limiting
- daisy chained tasks
- absolute and relative tasks
- several types of reference traverses
• Incremental or absolute encoder emulation
• Compatble with a wide range of feedback:
- Resolver up to 36 poles
- ComCoder
- Incremental or Sine Encoder with Halls
- Sine Encoder with EnDat/HIPERFACE/BISS
- Sine Encoder without Data
- Incremental Encoder A quad B
• Two current classes: 3A and 6A rated current at up to 400 V mains voltage (6A requires additional fan)
• Operation directly from mains supply, integral mains filter:
◦ 1 x 115 V AC, 1 x 230 VAC
◦ 3 x 115 V AC, 3 x 230 VAC
◦ 3 x 230 V AC, 3 x 400 VAC
• Power supply and regen circuit integrated in the master (first axis) for standalone operation
• Up to 7 extension axes at one master; axis modules are identical for all voltages
• Mounting on hat rail: suitable for 300 mm switchgear cabinets
• All shield connections directly at the amplifier, integral mains filter
• Resolver and high resolution sine-cosine encoder feedback
• Current controller, speed controller, position controller, electrical gearing, RS232, CANopen®
• LED-Display and keyboard in the front panel of the master module
• EtherCAT®, PROFIBUS or SERCOS optional
• Encoder emulation: ROD426-compatible (dec./bin.) or SSI (Gray/bin.) selectable
• Controls for the motor brake
• Fully programmable via RS232 interface
采購中心
