目錄:蘇州艾特森制藥設備有限公司>>滅菌設備>>無菌換熱器>> HPEx-L1無菌換熱器
| 產地 | 國產 | 產品大小 | 小型 |
|---|---|---|---|
| 產品新舊 | 全新 | 動力類型 | 氣動 |
| 結構類型 | 立式 | 每次處理量范圍 | 11-100 |
| 裝置方式 | 移動式 | 自動化程度 | 半自動 |
無菌換熱器
Aseptic Heat Exchanger
基本原理
Basic Principles
換熱器是熱流體的部分熱量傳遞給冷流體的設備，又稱為熱交換器。列管式換熱器由殼體、管束、管板、折流擋板和封頭組成。換熱器中流體的相對流向一般有順流和逆流兩種。順流時，入口處兩流體的溫差大，并沿傳熱表面逐漸減小。逆流時，沿傳熱表兩流體的溫差分布較均勻
Heat exchanger is a device that transfers part of heat from hot fluid to cold fluid, also known as heat exchanger. The tubular heat exchanger consists of shell, tube bundle, tube plate, baffle and head. The relative flow direction of fluid in heat exchanger generally has two kinds: downstream and countercurrent. The temperature difference between the two fluids at the inlet is the largest and decreases along the heat transfer surface. The temperature difference distribution of two fluids along the heat transfer meter is more uniform when countercurrent occurs.
無菌換熱器基本參數
Basic Parameters
性能及結構
Performance And Structure
◆大工作壓力：管程150bar，殼程150bar
Maximum working pressure: 150bar in pipe and 150bar in shell
◆允許溫差：熱流體平均溫度與冷流體平均溫度差≤70℃
Permissible temperature difference: the difference between the average temperature of hot and cold fluids is less than 70℃
◆材質：304/304L, 316/316L, 2205, 2507, S31254, C276，鈦材，坦材等
Material: 304/304L, 316/316L, 2205, 2507, S31254, C276, Titanium, Tan, etc
◆拋光要求：MP或EP，Ra≤0.4μm
Polishing requirements: MP or EP, Ra≤0.4μm
◆可實現CIP在線清洗和SIP在線滅菌
CIP online cleaning and SIP online sterilization can be realized
◆符合GMPFDA要求
It meets the requirements of GMP/FDA
應用
Application
◆艾特森系列無菌U型單/雙管板換熱器可廣泛應用于民用、石油、化工、電力、醫(yī)藥、食品等行業(yè)，可用于加熱、冷卻、蒸發(fā)、冷凝、余熱回收等各種情況
Aitesen series sterile U-tube exchangers can be widely used in civil, petroleum, chemical, power, medicine, food and other industries, and can be used in heating, cooling, evaporation, condensation, waste heat recovery and other situations
◆選用雙管板換熱器，可防止加熱冷卻介質之間的交叉污染
Double tube-plate heat exchanger can prevent cross-contamination between heating and cooling media
◆可根據用戶要求進行非標定制
Non-standard customization can be made according to user’s requirements
4
制藥網