氣流干燥機 氣流干燥設備

QG/FG系列氣流干燥機原理Principle

底部強化器設計*，攪拌齒為菱形，其流線性能使風阻達到小，設置在圓錐形料斗內，分動刀和定刀，粉碎*,使下落的結塊物料迅速粉碎為適合氣流干燥的粉粒料，攪拌的另-一個主要作用是分散物料，加大了與料斗下面進來的高速熱風的接觸面積，于是料斗區形成了一個強烈傳熱傳質的流化床，大部分濕分在料斗區被干燥。隨著干燥的進行，變輕變細的干料受氣流作用明顯，與氣流一起上升并進一步干燥，后從干燥塔頂部出來進入物料收集系統。
The bottom of dryer has the unique enhanced design, stirring rack is diamond shaped, its linear flow design can reduce wind resistance into a minimum degree, also the grinding knifes are equipped at the bottom, the results of grinding are obvious, the falling the materials can be rapidly crushed into powders which are suitable for air flow drying, another function of stirring is dispersing materials, thus can enlarge the contacting area with high speed hot air coming from the bottom, and most of moisture is dried during this stage, and then the dried material becomes lighter and lighter, and flow up with hot air, finally comes out from the top of dryer and goes into material colleting system.

適用物料Materials
   本機特別適合處理含濕量比較大的呈膏糊狀的濕物料，以及用其他氣流干燥方法無法干燥的物料，適用于濾餅、膏狀、帶有一定粘性、要求成品為粉末的產品。

 QG/FG系列氣流干燥機