進口立式軸流混流泵美國立式軸流混流泵

進口立式軸流混流泵產品概述：
混流泵是美國泰樂采用優秀的水力模型，并滿足各種工況要求的條件下精心設計而成。該系列產品結構緊湊、合理，運行穩定可靠；可選用開式、閉式；單基礎、雙基礎等結構形式，使用范圍十分廣泛。

進口立式軸混流泵主要應用領域：
城鎮工礦給排水、市政工程、污水處理；
鋼鐵、冶金、電廠、造船、水廠方面的循環、提升水等；
水利工程、江河治理

進口立式軸流泵美國立式軸流泵產品信息

進口立式軸流混流泵美國立式軸流混流泵

進口立式軸流混流泵產品概述：

混流泵是美國泰樂采用優秀的水力模型，并滿足各種工況要求的條件下精心設計而成。該系列產品結構緊湊、合理，運行穩定可靠；可選用開式、閉式；單基礎、雙基礎等結構形式，使用范圍十分廣泛。

進口立式軸混流泵主要應用領域：

城鎮工礦給排水、市政工程、污水處理；

鋼鐵、冶金、電廠、造船、水廠方面的循環、提升水等；

水利工程、江河治理；

農田灌溉、水產養殖、鹽場等

進口立式軸混流泵性能范圍：

流量：0.2—60 m3/s

揚程：2—30m

泵出水口徑：350mm—4500mm

輸送介質：清水、雨水、污水和海水等介質，溫度50°C以下；

配套電機：

電源：380V、660V、6000V、10000V，50HZ；防護等級：IP23、IP44：絕緣等級：B級、F級

葉輪轉向：從電機向下看，葉輪順時針方向旋轉

進口立式軸混流泵特點：

1軸流式水流設計，水量特大，省電、安裝容易 2. 采用耐磨性特強之雙組式機械軸封、耐海水、污水、污泥之磨損 3. 優秀水利模型，制作精良，保證了用戶的性能要求；
4、雙重機械密封，可靠的防止漏水，大型泵因軸向力大，采用推力軸承，結構設計合理，潤滑充分，散熱良好，軸承使用壽命長；

進口立式軸混流泵美國泰樂TYLER售后服務：

1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Vertical axial flow pump

Product introduction of vertical axial flow mixed flow pump:

The United States is a mixed flow pump with hydraulic model is the most outstanding new music, and meet all the conditions required under the condition of carefully designed. This series of products are compact and reasonable in structure, stable and reliable in operation, and can be used in open and closed type.

Main application fields of vertical shaft mixed flow pump:

Urban water supply and drainage, municipal engineering, sewage treatment;

Iron and steel, metallurgy, power plants, shipbuilding, water, water, etc.;

Water conservancy project, river management;

Irrigation, aquaculture, salt etc.

The performance range of vertical axial flow pump:

Flow rate: 0.2 - 60 m3/s

Head: 2 - 30m

Pump outlet diameter: 350mm - 4500mm

Transmission medium: water, rainwater, sewage and sea water and other media, temperature 50 degrees below C;

Matching motor:

Power supply: 380V, 660V, 6000V, 10000V, 50HZ; protection grade: IP23, IP44: insulation grade: B class, F class

Impeller steering: look down from the motor, the impeller clockwise rotation

Imported vertical shaft mixed flow pump:

1 axial flow design, large water saving, easy installation, strong wear resistance characteristics using 2 dual mechanical seal, wear resistant to water, sewage and sludge of 3 excellent hydraulic model, the production of sophisticated, ensure the user's performance requirements;

4, double mechanical seal, reliable to prevent leakage, large pump due to axial force, the use of special thrust bearings, structural design is reasonable, full lubrication, good heat dissipation, bearing service life is long;

The United States imported vertical mixed flow pump shaft Taylor TYLER customer service service:

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.