 |
上海凡而閥門有限公司
主營產品： 球閥、針型閥、截止閥、閘閥、止回閥、蝶閥、阻火器、排氣閥、排泥閥、過濾器、放料閥、隔膜閥、安全閥、旋塞閥、手機：13917909444 |
會員1.png)
|
上海凡而閥門有限公司
主營產品： 球閥、針型閥、截止閥、閘閥、止回閥、蝶閥、阻火器、排氣閥、排泥閥、過濾器、放料閥、隔膜閥、安全閥、旋塞閥、手機：13917909444 |
| 參考價 | 面議 |
聯系方式：蘇生查看聯系方式
更新時間：2017-03-14 14:21:44瀏覽次數：424
聯系我們時請說明是制藥網上看到的信息，謝謝!
進口高壓角式截止閥
德國巴赫進口高壓角式截止閥概述：
進口高壓角式截止閥的啟閉件是塞形的閥瓣，密封面呈平面或錐面，閥瓣沿流體的中心線作直線運動。高壓角式截止閥又稱角閥，閥桿的運動形式，有升降桿式（閥桿升降，手輪不升降），也有升降旋轉桿式（手輪與閥桿一起旋轉升降，螺母設在閥體上）。只適用于全開和全關，不允許作調節和節流。截止閥屬于強制密封式閥門，所以在閥門關閉時，必須向閥瓣施加壓力，以強制截止閥的密封面不泄漏。當介質由閥瓣下方進入閥門時，操作力所需克服的阻力，是閥桿和填料的摩擦力與由介質的壓力所產生的推力，關“高壓角式截止閥” 的力比開“高壓角式截止閥”的力大，所以閥桿的直徑要大，否則會發生閥桿頂彎的故障。
Inlet high angle stop valve
Overview of high pressure angle stop valve imported from Germany Bach:
Imported high-pressure angle type valve opening and closing parts are plug shaped valve, sealing surface flat or cone, fluid along the centerline of the valve for linear motion. The high-pressure angle type valve and angle valve stem form of exercise, a lifting rod (rod lifting, lifting wheel), but also lift rotating rod (hand wheel and rotate with the stem nut lifting, located in the body). Only applicable to fully open and fully closed, does not allow for adjustment and throttle. Valve is a mandatory seal valve, so the valve is closed, the valve must be applied to force the valve sealing surface does not leak. When the medium into the valve from the bottom of the valve, the operating force required to overcome the resistance, is the stem and the packing friction and pressure generated by the media thrust, "high pressure angle type valve" than "high-pressure angle type stop valve force, so the diameter of the valve stem, otherwise it will bend the stem top of the fault.
進口高壓角式截止閥的定義：
進口高壓角式截止閥是一種進口和出口呈90°C夾角的截止閥，這種閥門除了具備一般法蘭截止閥的優點和使用要求外，zui大的特點就是方便安裝在管道系統的拐角處，既節省了90°C的彎頭，又方便開閉操作。高壓角式截止閥在化肥廠的合成氨系統和制冷系統中等到非常廣泛的應用。
The definition of imported high-pressure angle type valve:
Imported high-pressure angle type valve is a valve in the import and export of 90 DEG C angle, in addition to this valve has the advantages of general flange valve and operation requirements, the biggest feature is easy to install in the corner of the pipeline system, not only saves the elbow 90 degrees C, and convenient opening and closing operation. High angle stop valve in the chemical fertilizer plant ammonia system and refrigeration system until a very wide range of applications.
進口高壓角式截止閥技術參數
產品名稱 | 驅動方式 | 連接形式 | 結構形式 | 密封結構 | 壓力范圍 | 公稱通徑 | 常用材質 | 產品型號 |
進口高壓角式截止閥 |
手動 |
法蘭 |
閥瓣非平衡式 |
硬密封 |
16.0-32.0MPaA |
DN6-1250 |
鑄鋼、不銹鋼 |
bach-a |
閥門尺寸標準
| 閥門試驗標準
| 閥門交貨標準
| 工業閥門標準
| 法蘭閥門標準
| 焊接閥門標準
| 對夾式連接閥
| 內螺紋連接閥
| 可以提供美國 |
DIN EN558-2005
| DIN EN12266-1-2003
| DIN3230-2-1974
| DIN EN 1171-2003
| DIN EN 3202-1977
| DIN EN 3202-1982
| DIN EN 3202-1979
| DIN EN 3202-1977
| API、ANSI等標準
|
進口高壓角式截止閥guan網：http://www.twvalve。。ｎｅｔ/html/3456.html
