制藥網
詳細介紹
P7700 系列 TriMode 探頭為實時示波器提供了的探頭保真度。此外，憑借接口創新技術，如焊接，探頭輸入緩沖器距末端只有幾毫米，P7700 系列探頭提供了的易用性，可以簡便地連接當今挑戰性的電子設計。
主要特點
高帶寬，確保信號保真度
20 GHz P7720
16 GHz P7716
13 GHz P7713
8 GHz P7708
對器件影響達到最小
又薄又軟的焊接
又輕又軟的探頭電纜
有源緩沖設計，探頭負載低
連接簡便的 TekFlex™ 連接器技術
掐住打開的附件連接器
通用連接能力 – 焊接，選配點焊探頭完成手持或夾具探測，同軸電纜輸入(SMA 轉接頭)
全部帶寬可達 20 GHz
探頭電纜和焊接在擴展的溫度范圍內工作
探頭和特定 S 參數
基于的 S 參數模型，對探頭和的信號路徑進行全面 AC 校準
為每個探頭和創建的 DSP 濾波器
TekConnect® 接口，提供了示波器/探頭控制功能和易用性
通過探頭按鈕或從示波器菜單中直接控制
通過示波器自動控制探頭設置
在連接示波器時自動識別探頭和
應用
DDR/LPDDR 內存檢驗
高速串行總線調試
MIPI D-PHY/C-PHY/M-PHY 合規測試
HDMI 和 DisplayPort 一致性測試
The P7700 series TriMode probes provide the highest probe fidelity for a real-time oscilloscope. In addition, with interface innovations such as soldering tips and probe input buffers only a few millimeters from the tip tip, the P7700 series probes offer unparalleled ease of use for easily connecting today's most challenging electronic designs.
The main features
High bandwidth ensures signal fidelity
20 GHz P7720
16 GHz P7716
13 GHz P7713
8 GHz P7708
The effect on the device is minimized
A thin, soft welding tip
Light and soft probe cable
Active buffer tip design, low probe load
Connection simpler TekFlex ™ connector technology
Hold the open attachment connector
Universal joint capability - welding tip, optional spot welding probe for handheld or fixture detection, coaxial cable input (SMA adapter)
Total bandwidth up to 20 GHz
The probe cable and welding tip work in an extended temperature range
Probe and tip specific S parameters
Based on the unique S parameter model, the signal path of the probe and the tip is fully AC calibrated
Create a unique DSP filter for each probe and tip
TekConnect ® interface, provide the function of oscilloscope probe control and ease of use
Direct control through the probe button or from the oscilloscope menu
The probe setting is automatically controlled by an oscilloscope
Automatic identification of probe and tip when connected to oscilloscope
application
DDR/LPDDR memory check
High-speed serial bus debugging
MIPI d-phy/c-phy/m-phy compliance test
HDMI and DisplayPort conformance tests
制藥網