制藥網
詳細介紹
| 型號 | 衰減 | 帶寬 | 輸入阻抗 | 電壓 |
|---|---|---|---|---|
| P5200A | 50X / 500X | 50 MHz | 10 M? || 2 pF | 500X：± 1300 V |
| P5202A | 20X / 200X | 100 MHz | 5 M? || 2 pF | 200X：± 640 V |
| P5205A | 50X / 500X | 100 MHz | 10 M? || 2 pF | 500X：± 1300 V |
| THDP0200 | 50X / 500X | 200 MHz | 10 M? || 2 pF | 500X：± 1500 V |
| TMDP0200 | 25X / 250X | 200 MHz | 5 M? || 2 pF | 250X：± 750 V |
| P5210A | 100X / 1000X | 50 MHz | 40 M? || 2.5 pF | 1000X：± 5600 V |
| THDP0100 | 100X / 1000X | 100 MHz | 40 M? || 2.5 pF | 1000X：± 6000 V |
| TDP0500 | 5X / 50X | 500 MHz | 1 M? || ≤ 1 pF | 50X：± 42 V |
| TDP1000 | 5X / 50X | 1 GHz | 1 M? || ≤ 1 pF | 50X：± 42 V |
| P6251 | 5X / 50X | 1 GHz | 1 M? || ≤ 1 pF | 50X：± 42 V |
高壓差分探頭
TMDP0200 ? THDP0200 ? THDP0100 ? P5200A ? P5202A ? P5205A ? P5210A
泰克 THDP0100 和 P5210A 擁有的差分動態范圍能力，用戶 可以安全地測量高達 ±6000 V 的電壓。 THDP0100 支持的帶寬 高達 100 MHz，轉換速率高達 2500 V/ns，增益為 1/1000。 這些 探頭隨附兩種尺寸的鉤式端部，還配有超范圍可視音頻指示 器，當用戶超出探頭的線性范圍時向他們發出警告。
THDP0200 和 P5205A 為有源差分探頭，能夠安全地測量高達 ±1500 V 的差分電壓。 探頭在測量電機驅動和電力轉換器等 IGBT 電路時十分有效。 THDP0200 支持的帶寬高達 200 MHz， 轉換速率高達 275 V/ns，增益為 1/250。
TMDP0200 和 P5202A 適用于差分電壓要求高達 ±750 V 的中壓應 用。 這些探頭的衰減范圍更低，信噪比更佳。
P5200A 可用于任何示波器，用戶把示波器接地時還可以安全 地測量浮動電路。 P5200A 有源差分探頭將浮動信號轉換為 參考地電平的的低壓信號，任何參考地電平的示波器都可以 安全且簡便地顯示。
特性和優點
帶寬高達 200 MHz
高達 6000 V 差分電壓（直流 + 峰值交流） 高達 2300 V 共模電壓 (RMS)
超范圍指示器
通過安全認證
可切換衰減
可切換帶寬限制
應用
浮動測量
開關電源設計 電機驅動設計 電子鎮流器設計
CRT 顯示器設計
電力轉換器的設計和維修
電源設備評估
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.
Key performance specifications
Bandwidths up to 200 MHz
Up to 6000 V differential (DC + pk AC)
Up to 2300 V common (RMS)
Key features
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable bandwidth limit
Applications
Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
Connectivity
BNC interface (P5200A probes)
TekVPI® interface (TMDP and THDP Series probes)
TekProbe® interface (P5202A, P5205A, and P5210A Series probes)
Model overview
| TMDP0200 | THDP0200 | THDP0100 | |
|---|---|---|---|
| Attenuation | 25X / 250X | 50X / 500X | 100X / 1000X |
| Differential Voltage | 250X: ±750 V 25X: ±75 V | 500X: ±1500 V 50X: ±150 V | 1000X: ±6000 V 100X: ±600 V |
| Common Mode Voltage | ±750 V | ±1500 V | ±6000 V |
| Maximum Input Voltage-to-Earth | 550 V CAT I 300 V CAT III | 1000 V CAT II 600 V CAT III | 2300 V CAT I 1000 V CAT III |
| Bandwidth | 200 MHz | 200 MHz | 100 MHz |
| Rise Time | <1.8 ns | <1.8 ns | <3.5 ns |
| Slew Rate | <275 V/ns at 1/250 gain | <650 V/ns at 1/500 gain | <2500 V/ns at 1/1000 gain |
| Input Impedance at the Probe Tip | 5 M? || <2 pF | 10 M? || <2 pF | 40 M? || <2.5 pF |
| Typical CMRR | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB |
| Cable Length | 1.5 m | 1.5 m | 1.5 m |
| P5200A | P5202A | P5205A | P5210A | |
|---|---|---|---|---|
| Attenuation | 50X / 500X | 20X / 200X | 50X / 500X | 100X / 1000X |
| Differential Voltage | 500X: ±1300 V 50X: ±130 V | 200X: ±640 V 20X: ±64 V | 500X: ±1300 V 50X: ±130 V | 1000X: ±5600 V 100X: ±560 V |
| Common Mode Voltage | ±1300 V | ±640 V | ±1300 V | ±5600 V |
| Maximum Input Voltage-to-Earth | 1000 V CAT II | 450 V CAT l 300 V CAT ll | 1000 V CAT II | 2300 V CAT l 1000 V CAT III |
| Bandwidth | 50 MHz | 100 MHz | 100 MHz | 50 MHz |
| Differential Input Impedance | 10 M? || 2 pF | 5 M? || 2 pF | 10 M? || 2 pF | 40 M? || 2.5 pF |
| Input Impedance between each Input and Ground | 5 M? || 4 pF | 2.5 M? || 4 pF | 5 M? || 4 pF | 20 M? || 5 pF |
| Typical CMRR | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >30 dB 50 MHz: >26 dB | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >40 dB 50 MHz: >30 dB | ||
| Cable length | 1.8 m | |||
制藥網