環保型量油孔

環保型量油孔（LYK-F型）
Environmental protection type oil hole

量油孔安裝于石油、化工儲罐頂部，用以測量罐內物料的標高、溫度以及取樣等作用。而化工物料均帶有不同程度的有害氣味，測量時不能排放到大氣中。為了能完成測量程序，確保環境不受影響和操作工人操作安全，環保型量油孔就能起到這方面的作用。

The amount of oil hole at the top of the petroleum, chemical storage tanks, used to measure the elevation of the tank material, temperature, and sampling. Chemical materials with different levels of harmful odor, the measurement can not be discharged into the atmosphere. In order to complete the measurement procedures to ensure that the environment is not affected and the operation of the operational safety of workers, the amount of environmentally friendly hole will be able to play this role.

二、操作方法Operation method

產品安裝在儲罐頂上，平時均能密封，需要測量化工品時，先旋開、拔出測量口密封件，將窄口式測量組件放在上蓋中間擰緊，再按下中間密封操作手柄，就能打開筒體密封件，此時將測量尺從上方窄口縫中伸入，即可測量液位的標高。操作完成后先拉回手柄，取出測量組件，再放入密封件擰緊。如對油品進行測量、取樣時，拉下中間操作手柄，打開上蓋即可。

Product is installed at the top of the tank, usually can absolutely sealed, first unscrew the need to measure the chemicals, pull out the measuring port seals, the narrow mouth measurement components on the middle of the superstructure tighten, and then press the middle sealing operationhandle, you can open the cylinder seals, the measurement scale can be measured from the top of the narrow mouth cracks stretching from the elevation of the level. Operation is completed first retract the handle, remove the measuring component, then add the seals tighten. If oil measurement, sampling, pull down the middle of the operating handle, open the top cover can be.

三、產品特點Product Features

產品結構緊湊，操作安全方便，采用雙密封裝置，具有防毒功能，既可適用于化工罐，又可適用于油品罐，適用面廣。

Compact, safe and convenient operation, double-sealing device with anti-virus function can be used in 　　　　chemical tank, but also applies to the oil tank, applicable to a wide range.

企業業績：

新疆鹽湖化工廠

新疆昆侖股份有限公司 第二橡膠廠

置年石化（揚州）有限公司 6萬噸/年的雙酚A生產裝置項目

上海億升海運倉儲有限公司 儲罐建設及配套工程改建項目