進口立式多級離心泵是采用了高效節能的優秀水力模型，因此具有效率高，性能范圍廣等優點，更好地滿足了用戶的使用要求。另外，該泵在結構上采用了立式、分段形式，且運轉安全、平穩、壽命長、占地面積小、安全維修方便。立式多級離心泵采用國際推薦使用的高效節能產品水力模型，為立式多級多節段式結構，螺桿把進水段、中段、出水段夾緊聯成一體。水泵每一級裝一個葉輪、一個導水葉。軸向力采用水力平衡法解決，殘余軸向力由球軸軸承承受，用油脂潤滑。軸封采用軟填料或機械密封。德國漢克(HANK)立式多級離心泵主要供吸送稀釋的、清潔的、不腐蝕的、不爆炸的清水及物理化學性質類似水的不含固體顆粒或纖維的液體。
適用范圍
廣泛應用于高層建筑的消防、生活供水以及空調機組循環、冷卻水輸送。
產品特點
1、水力模型：效率高，性能范圍廣。
2、結構新穎，運行可靠：取消了平衡鼓，其軸向力采用水力平衡，解決了平衡鼓易銹蝕、易咬死、易磨損的問題，保證了運行更加可靠。
3、更少的運行、維修費用：采用優質機械密封，耐磨損、無泄漏、使用壽命長，故障率低，具有更少的運行維修費用。
4、運行平穩，噪音低：采用低轉速電機，使泵運行平穩，噪音更低。
5、立式結構，占地面積小。
技術參數
流量：4.2-504m3/h；
揚程：24-240m；
功率：1.5-450kw；
轉速：1480r/min；
口徑：φ40-φ250；
溫度范圍：0-+90℃；
工作壓力：≤2.4Mpa。
使用條件
1、使用的介質應類似水，運動粘度<150mm2/s,且無堅硬顆粒，無腐蝕性質；
2、使用的環境海拔高度<1000米;
3、介質使用溫度-15℃～120℃;
4、系統工作壓力≤2.5MPa;
5、周圍環境溫度應低于40，,相對濕度低于95%。
Vertical multi-stage centrifugal pump is a high efficiency and energy saving excellent hydraulic model, so it has high efficiency, wide range of performance advantages, and better meet the user's requirements. In addition, the pump in the structure of the vertical, sub-form, and safe operation, smooth, long life, small footprint, safe and easy maintenance. Vertical multi-stage centrifugal pump using the international recommended efficient energy-saving products, hydraulic model for the vertical multi-level multi-segment structure, the screw into the water section, the middle section of the water section together. Each level of the pump is equipped with an impeller, a water guide. The axial force is solved by the hydraulic balance method, and the residual axial force is borne by the ball bearing and lubricated with grease. Shaft seal with soft packing or mechanical seal. Germany Hank imports of vertical multi-stage centrifugal pump is mainly for the absorption of diluted, clean, non-corrosive, non-explosive water and physical and chemical properties similar to the water without solid particles or fiber liquid.
The scope of application
Widely used in high-rise building fire, water supply and air conditioning unit cycle, cooling water delivery.
Features
1, advanced hydraulic model: high efficiency, wide range of performance.
2, the structure is novel, reliable operation: the elimination of the balance drum, the axial force of the use of hydraulic balance, completely solve the balance drum easy to rust, easy to kill, easy to wear problems, to ensure a more reliable operation.
3, less running, maintenance costs: the use of high-quality mechanical seals, wear-resistant, no leakage, long life, low failure rate, with less running and maintenance costs.
4, smooth operation, low noise: the use of low-speed motor, the pump running smoothly, the noise is lower.
5, vertical structure, small footprint.
Technical Parameters
Flow: 4.2-504m3 / h;
Head: 24-240m;
Power: 1.5-450kw;
Speed: 1480r / min;
Caliber: φ40-φ250;
Temperature range: 0- + 90 ℃;
Working pressure: ≤ 2.4Mpa.
Conditions of Use
1, the use of the media should be similar to water, kinematic viscosity<150mm2 / s, and no hard particles, no corrosive properties;
2, the use of the environment altitude <1000 meters;
3, the use of medium temperature -15 ℃ ~ 120 ℃;
4, the maximum system working pressure ≤ 2.5MPa;
5, the ambient temperature should be less than 40, relative humidity less than 95%.
德國漢克（HANK）成立于1852年創建于門興格拉德巴赫（Monchengladbach）是位于德國北萊茵-威斯特州杜塞爾多夫市以西的一座城市。于19世紀50年代初德國經濟快速發展，由于德國能源短缺，政府在節能方面加大力度，因此HANK(Trouble Less pump的水泵)公司成立。漢克水泵是以生產高品質、的水泵、測量及控制系統而的跨國性生產企業，在幾十個國家擁有子公司及分支機構，公司產品涉及用途：石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。
GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
德國漢克（HANK）水泵的價值理念概括為：責任－遠見－創新。我們因自身的責任感、遠見及專注于創造的解決方案和理念，而成為的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.
采購中心
