特點 | 優勢 |
超快響應瞬態負載電流 | 提供與實際電池相同的輸出特性。 |
可變輸出電阻 | 允許模擬電池的內部電阻。 |
脈沖峰值、平均值和基線負載電流測量 | 支持測量負載電流進行功耗驗證或分析。 |
100nA 直流電流靈敏度 | 為監視電池供電產品的睡眠模式低電流提供所需的靈敏度。 |
電流級別測量功能 | 支持在各種設備操作狀態水平下測量負載電流。 |
接收高達 3A | 就像一個電子負載,允許這些電源模擬放電的可充電電池,用于測試電池充電器或電池充電器控制電路的性能。 |
打開感應導線檢測 | 指示遠程感應導線是否存在中斷,或者遠程感應導線與測試夾具的連接是否存在開路。 |
內置數字電壓表 | 允許在測試系統的任何位置測量 –5V 到 +30V 直流的信號,其額定準確度與電源電壓回讀相同。 |
The characteristics of
advantage
The ultra-fast response to the transient load current provides exactly the same output characteristics as the actual battery.
Variable output resistor
Allows to simulate the internal resistance of the battery.
Pulse peak, mean and baseline load current measurements support the measurement of load current for power verification or analysis.
The 100nA dc current sensitivity provides the required sensitivity to monitor low sleeping mode currents in battery-powered products.
The current level measurement function supports the measurement of load current at various operating conditions.
A rechargeable battery that receives up to 3A as an electronic load, allowing these power supplies to simulate discharge, for testing the performance of a battery charger or battery charger control circuit.
Turn on the sensor wire to detect if there is a break in the remote sensor wire or if there is an open connection between the remote sensor wire and the test fixture.
The built-in digital voltmeter allows the measurement of -- 5V to +30V dc signals at any point in the test system with the same rated accuracy as the power voltage read back.