塑膠干燥機系列 Plastic Direct-drive Dryer Series
塑料干燥機
東莞市金煒機械有限公司是香港JINWELL集團旗下的大陸子公司，：/。
- 塑料干燥機采用均勻分散熱風之高性能熱風擴散裝置，保持塑料干燥溫度均勻，增加干燥效率。
- *熱風彎管型設計，可避免粉屑堆積于電熱管底部，引起燃燒。
- 料桶內及內部零部件一律采用不銹鋼制。料桶內與底部分離，清料方便，換料迅速。
- 采用比例式偏差指示溫控器，可精確控制溫度。
- 雙重過熱保護裝置，可減少人為或機械故障所產生的意外。
- 微電腦控制，全位數(shù)式PD，控制LED狀態(tài)顯示。
- 24小時定時自動開機。
- 斜式易拆磁鐵底座。
Hopper Dryer
- High performance hot air diffusion device using uniformly distributed hot air, keep the plastic dry and uniform temperature, increase drying efficiency.
- Design of special hot air bent pipe, to avoid accumulation of power particles in the bottom of the electric heating pipe to cause combustion.
- The barrel and the inner parts are all made of stainless steel. Separation between the barrel and the bottom, material cleaning convenience, refueling quickly.
- Proportional deviation indicating controller, can precise temperature control.
- Double overheating protection device, can reduction of accidents caused by human or mechanical failure.
- Microcomputer control, full figure PD, control LED status display.
- 24 hour timer automatically boot.
- Inclined easy detachable magnet base.
采購中心
